Compare
- Supports 10 Gb Ethernet for fast data transfer
- Multi-mode OM3 fiber with a 50-micron core providing high bandwidth over medium distances
- Optimized for LED and VCSEL laser transmission at 850 nm and 1300 nm wavelengths
Expected to ship within 12 days of order
Compare
- Twisted Pair Patch Cable with RJ45 connectors
- Cat.6 S/FTP PIMF, LSZH
- Integrated snagless connector for latch protection
Expected to ship within 12 days of order
Compare
- Twisted Pair Patch Cable with RJ45 connectors
- Cat.6 S/FTP PIMF, LSZH
- Integrated snagless connector for latch protection
Expected to ship within 12 days of order
Compare
- Supports 10/40/100 Gb Ethernet for high-speed data transfer
- Single-mode fiber with a 9-micron core for long-distance transmission
- Optimized for laser transmission at 1310 nm and 1550 nm wavelengths
Expected to ship within 12 days of order
Compare
- Twisted Pair Patch Cable with RJ45 connectors and Test Report (100% Test)
- Cat.6 S/FTP PIMF, LSZH
- Integrated snagless connector for latch protection
Expected to ship within 12 days of order
Compare
- Twisted Pair Patch Cable with RJ45 connectors and Test Report (100% Test)
- Cat.6 S/FTP PIMF, LSZH
- Integrated snagless connector for latch protection
Expected to ship within 12 days of order
Compare
- OM4 FIBER CABLE: OM4 Laser-Optimized Multimode Fiber Cable delivers up to 100 Gbps Ethernet; Full-duplex zip-cord with color-coded TX/RX connectors for cabling servers and Storage Area Networks (SANs)
- QUALITY CONSTRUCTION: 50/125µm fiber core/cladding is immune to EMI; Protective Aramid fiber sheath for improved tensile strength and crush resistance; LC/LC connectors with UPC polished ceramic ferrules for insertion loss below 0.3dB
- RATINGS AND RELIABILITY: Individually tested for signal integrity; LSZH jacket emits low-smoke and fumes if combusted; Attenuation value under 2.3dB/km meets or exceeds industry standards
Expected to ship within 12 days of order
Compare
- 6ft cable length
- Male to Female
- USB to DB9
Expected to ship within 6 days of order
Compare
- 2x RJ45 (8P8C) connectors
- Boots with kink protection, strain relief and latch protection
- Length marking on boot
Expected to ship within 10 days of order
Compare
- AWG 24 Twinax cable
- 5 m maximum distance
- 1.0625-10.52Gbps supported data rate
Expected to ship within 10 days of order
Compare
- 100% Guaranteed Compatibility in all OEM applications
- Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification
- Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms
Expected to ship within 12 days of order
Compare
- 82FT cable length
- LC to LC
- Orange in color
Expected to ship within 12 days of order
Compare
- 100-pack of modular plugs
- Cat6 RJ45
- For round stranded UTP Conductor
Expected to ship within 12 days of order
Compare
- 10G SFP+ connector on both sides
- Drives 10 Gigabit Ethernet (3m distance)
Expected to ship within 10 days of order
Compare
- Twisted Pair Patch Cable with RJ45 connectors
- Cat.6 S/FTP PIMF
- Integrated snagless connector for latch protection
Expected to ship within 12 days of order
Network cables are an essential part of any office setup, regardless of the office size - anything from a home office setup, to large corporate offices will require a range of network cables. We carry network cables in stock for every purpose, be it short patch cables for use in a server cabinet, or much longer cables for running above ceilings or behind walls, or anything in between - we have it all. The main connection type used for network cables is the RJ45 connector type. This is the generic standard for connection to switches, patch panels, network cards etc. When picking the cable that is right for you, you should also look out for which color may work best in your setting, and you might want to consider a snagless cable, especially if you run multiple cables across your network setup.