- Supports 10/40/100 Gb Ethernet for high-speed data transfer
- Single-mode fiber with a 9-micron core for long-distance transmission
- Optimized for laser transmission at 1310 nm and 1550 nm wavelengths
Expected to ship within 11 days of order
-or spend €100.00 to get free shipping
- 2x RJ45 (8P8C) connectors
- Boots with kink protection, strain relief and latch protection
- Length marking on boot
Expected to ship within 9 days of order
-or spend €100.00 to get free shipping
- TAA-compliant
- Constructed with high quality, made in the USA raw cable for consistent, reliable performance
- Snagless RJ45 connector design protects clips from being easily snapped off – great for applications with high insertion cycles
Expected to ship within 11 days of order
-or spend €100.00 to get free shipping
- 33ft cable length
- SC Multimode To SC
- Backward compatible with legacy LAN's
Expected to ship within 11 days of order
-or spend €100.00 to get free shipping
- 15.2 m
- RJ-45 Male
- RJ-45 Male
Expected to ship within 11 days of order
-or spend €100.00 to get free shipping
- 15.2 m
- RJ-45 Male
- RJ-45 Male
Expected to ship within 11 days of order
-or spend €100.00 to get free shipping
- 15.2 m
- RJ-45 Male
- RJ-45 Male
Expected to ship within 11 days of order
-or spend €100.00 to get free shipping
- 2x LC SM male connectors
- OS1 (9/125)
- LSZH (Low-Smoke, Zero-Halogen) cable jacket
Expected to ship within 11 days of order
-or spend €100.00 to get free shipping
- Twisted Pair Patch Cable with RJ45 connectors
- Fully tamper resistant key required to release the secure lockandnbsp;
- Cat.6A S/FTP PIMF, LSZH
Expected to ship within 10 days of order
-or spend €100.00 to get free shipping
- OS2 FIBER CABLE: Single Mode OS2 Fiber Cable is immune to EMI and optimized for 100Gbps networks; Coarse Wavelength Division Multiplexing (CWDM) enables extended 1260-1625nm wavelength support for greater channel isolation over long distances
- QUALITY CONSTRUCTION: LC/LC-UPC ends for improved return loss over PC polish; Numbered and color-coded connectors to indicate polarity; Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 10mm
- SAFETY AND RELIABILITY: Individually tested for guaranteed performance; Test report included; LSZH jacket emits low toxic fumes if combusted; Safe for enclosed/poorly ventilated spaces; Attenuation value under 0.35dB/km outperforms industry standards
Expected to ship within 11 days of order
-or spend €100.00 to get free shipping
- OM2
- 5 m
- LC Male
Expected to ship within 11 days of order
-or spend €100.00 to get free shipping
- 2 x LC Male to 2 x LC Maleandnbsp;
- Twin Zip, Singlemode 9/125µmandnbsp; fibre
- Total immunity to electrical and electromagnetic interference (EMI)
Expected to ship within 10 days of order
-or spend €100.00 to get free shipping
- OM4 FIBER CABLE: OM4 Laser-Optimized Multimode Fiber Cable delivers up to 100 Gbps Ethernet; Full-duplex zip-cord with color-coded TX/RX connectors for cabling servers and Storage Area Networks (SANs)
- QUALITY CONSTRUCTION: 50/125µm fiber core/cladding is immune to EMI; Protective Aramid fiber sheath for improved tensile strength and crush resistance; LC/LC connectors with UPC polished ceramic ferrules for insertion loss below 0.3dB
- RATINGS AND RELIABILITY: Individually tested for signal integrity; LSZH jacket emits low-smoke and fumes if combusted; Attenuation value under 2.3dB/km meets or exceeds industry standards
Expected to ship within 11 days of order
-or spend €100.00 to get free shipping
- 1x LC SM male connector
- 1x SC SM male connector
- OS1 (9/125)
Expected to ship within 11 days of order
-or spend €100.00 to get free shipping
- Twisted Pair Patch Cable with RJ45 connectors
- Cat.6A S/FTP PIMF
- Integrated snagless connector for latch protection
Expected to ship within 10 days of order
-or spend €100.00 to get free shipping
Network cables are an essential part of any office setup, regardless of the office size - anything from a home office setup, to large corporate offices will require a range of network cables. We carry network cables in stock for every purpose, be it short patch cables for use in a server cabinet, or much longer cables for running above ceilings or behind walls, or anything in between - we have it all. The main connection type used for network cables is the RJ45 connector type. This is the generic standard for connection to switches, patch panels, network cards etc. When picking the cable that is right for you, you should also look out for which color may work best in your setting, and you might want to consider a snagless cable, especially if you run multiple cables across your network setup.