A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other.
240-pin DIMMs are used to provide DDR2 SDRAM memory for desktop computers. DDR2 is a leading-edge generation of memory with an improved architecture that allows it to transmit data very fast.
Standard DDR2 240-pin DIMMs are available in DDR2 PC2-3200 SDRAM, DDR2 PC2-4200 SDRAM, DDR2 PC2-5300 SDRAM, and PC2-6400 SDRAM.
To use DDR2 memory, your system motherboard must have 240-pin DIMM slots and a DDR2-enabled chipset. A DDR2 SDRAM DIMM will not fit into a standard SDRAM DIMM socket or a DDR DIMM socket.
The number of black components on a 240-pin DIMM can vary, but it always has 120 pins on the front and 120 pins on the back, for a total of 240. 240-pin DIMMs are approximately 5.25 inches long and 1.18 inches high, though the heights can vary. While 240-pin DDR2 DIMMs, 184-pin DDR DIMMs, and 168-pin DIMMs are approximately the same size, 240-pin DIMMs and 184-pin DIMMs have only one notch within the row of pins. The notch in a 240-pin DDR2 DIMM is closer toward the center of the module.
| CAPACITY | 4GB |
| STANDARD | PC2-6400 |
| SINGLE MODULE OR DUAL KIT | Dual channel kit (2x2GB) |
| MEMORY SPEED | 800MHz |
| CAS LATENCY | CL6 |
| VOLTAGE | 1.8V |
| ERROR CHECKING | Non-ECC |
| REGISTERED | Unbuffered |
| TECHNOLOGY | 240-pin DDR SDRAM memory modules |
| CONFIGURATION | 256Meg x 64 module configuration |
| PACKAGING | Retail packaging |
| WARRANTY | Lifetime manufacturers warranty |
