- Premium, heat-dissipating adapter converts an NVMe M.2 SSD into a swappable U.2 SSD
- Flexible: easily install an NVMe M.2 SSD in minutes
- Swappable: protects your SSD connector from wear
Ready to ship today
-or spend €100.00 to get free shipping
- Standard 2.5” form factor H: 9.5mm. 3.3V, 4A maximum output current
- Built-in SFF-8639 plug connector + Built-in M.2 (NGFF) M-key receptacle connector, also supports CLKREQ# functions
- LED3 indicates Active status & LED2 ON indicates M.2/PCI-e 4 Lanes device Power OK
Ready to ship today
-or spend €100.00 to get free shipping
- Enclosure with tool-less design
- USB 3.2 / 3.1 Gen 1 / USB 3.0 SuperSpeed interface (5Gbps)
- Supports 2.5” HDDs and SSDs up to 9.5mm in height
Ready to ship today
-or spend €100.00 to get free shipping
- ■ Backplane support for 8 port SAS / SATA drives and 12 Gb/s Mini-SAS HD SFF-8643 + SGPIO
- ■ Supports eight 2.5"/3.5" SAS/SATA HDD/SSD hot-swap trays
- ■ Includes three 80mm x 38mm hot-swappable PWM fans
Expected to ship within 10 days of order
- USB-C 3.2 Gen 2 for speeds of up to 10 Gbps
- Supports M.2 PCIe NVM Express SSD with 2230/2242/2260/2280 form factor
- Innovative, easy-to-use screwdriver-free installation
Expected to ship within 7 days of order
-or spend €100.00 to get free shipping
- Backplane support for 20 port SAS / SATA drives and 12 Gb/s Mini-SAS HD SFF-8643 + SGPIO
- Supports twenty 2.5"/3.5" SAS/SATA HDD/SSD hot-swap trays
- Ball bearing sliding rails included for simple server rack integration
Expected to ship within 10 days of order
- USB 3.2 Gen 1 Type-C port* for faster data transfer
- Supports up to four SATA drives for reliable read and write performance
- Disk mode DIP switch to change from Hardware Control and Software Control configurations for setting RAID group
Expected to ship within 7 days of order
- Military-grade toughness: Subjected to U.S. MIL-STD-810H and IP68 testing, includes a protective silicone-rubber exterior
- Dual M.2 interface: Supports M.2 NVMe® PCIe® and SATA SSDs in 2242/2260/2280 sizes for seamless expansion
- Blazing-fast performance: USB-C® 3.2 Gen 2x2 offers speeds up to 20 Gbps
Expected to ship within 7 days of order
-or spend €100.00 to get free shipping
- External USB 3.0 HDD enclosure
- Compatible with 3.5" SATA HDD up to 6 TB
- Max. Transfer rate: 5 Gbit/s
Expected to ship within 7 days of order
-or spend €100.00 to get free shipping
- USB 3.2 Gen2 (10Gbps) interface
- Tool-free design
- Compatible with 2.5 inch SATA HDD/SSD
Expected to ship within 7 days of order
-or spend €100.00 to get free shipping
- Lockable hard drive trays prevent accidental drive removal
- SFF-8088 (or SFF-8644) connection cable supports four SATA 6Gb/s channels per cable (24Gb/s in total) and provides faster data transfer speeds than eSATA and USB
- Easy to use. QNAP NAS and PC can both use utility software to monitor, obtain, and manage JBOD information
Expected to ship within 11 days of order
- USB 3.2 Gen 1 Type-C port* for faster data transfer
- Supports up to four SATA drives for reliable read and write performance
- Disk mode DIP switch to change from Hardware Control and Software Control configurations for setting RAID group
Expected to ship within 8 days of order
- USB 3.2 Gen 2 Type-C port* for faster data transfer
- Supports up to two SATA drives
- Disk mode DIP switch to change from Hardware Control and Software Control configurations for setting RAID group
Expected to ship within 7 days of order
- DATA ENCRYPTION & BIOMETRIC SECURITY: Encrypted Hard Drive Enclosure that has 256-bit AES Data Encryption & secure access to external drive by fingerprint or master password to protect sensitive data
- BROAD DRIVE COMPATIBILITY: USB 3.0 (5Gbps) 2.5" SATA Drive Enclosure supports any SATA I/II/III HDD/SSD (5 mm to 9.5 mm) for fast data transfer speeds; 50 cm USB 3.0 Cable (USB-A to Micro-B) included
- SECURE FILE ACCESS: Once the USB 3.1 Gen 1 Enclosure is unlocked w/ the master password, an intuitive interface lets you manage up to 8 fingerprints & permissions so multiple users can share the drive
Expected to ship within 11 days of order
-or spend €100.00 to get free shipping
External hard disk enclosures for SATA, Mini PCI Express, ZIF & IDE interfaces from Transcend, NEON, RunCore , KingSpec & FileMate. With a durable aluminum case, these hard drive enclosures for sale are designed for 1.8”, 2.5" & 3.5” hard disks with eSATA, USB2.0, & USB3.0 PC interfaces, and IDE, LIF, Mini PCI Express, SATA, ZIF, & microSATA HDD interfaces. Hard drive cases are available in red, blue, green, orange, black, pink, aluminum, & silver colors.
