Free Shipping on Everything
30-day Money Back Guarantee
Free Returns for Any Reason within 30 days of purchase
Online Since 2003

128GB AData XPG SX300 mSATA 6Gb/s Solid State Disk (550MB/sec read speed) by Adata


128GB AData XPG SX300 mSATA 6Gb/s Solid State Disk (550MB/sec read speed) Image

No longer available. See alternative options

Key Features

  • 128GB AData mSATA XPG SX300 Solid State Disk
  • SATA III 6Gbps interface
  • Read speed up to 550MB/sec - Read speed up to 505MB/sec
  • Based on SandForce controller SF-2281
  • Suitable for many tablets, ultrabooks and other ultra-compact devices
See full specifications
See product description


Details
The increasing demand for high-performance system storage device is easily met by the Premier Pro SX300 mSATA 6GB/sec solid state drive. With a SandForce controller and 25nm (MLC) NAND Flash chips, the SX300 reaches random read and write speeds of up to 25,000/85,000 IOPS. When combined with the Sandy Bridge or Ivy Bridge platforms, the SX300 can achieve amazing performance on both desktop and notebook systems. The implementation of optimized firmware in the SX300 results in full utilization of the NAND Flash components, which translates to maximized storage capacity: a 7% increase over other solid state drives that use a SandForce controller. This zero percent over-provisioning is implemented with no loss to performance or supported features, and can be realized only by 100% screening and sorting of the NAND Flash.

SSD+ HDD Hybrid
With a SSD + HDD hybrid setup, the mSATA SSD acts as a cache drive instead of main storage. Using this configuration, systems can reach speed boosts comparable to systems with SSDs as primary drive, while still enjoying the larger storage capacities of a mechanical hard drive.

Excellent Cost Performance Value
The SX300 utilizes a SandForce controller with 25nm (MLC) NAND Flash chips. For the 256Gb model, transfer speeds are as high as 550MB/sec (read) and 505MB/sec (write). Random read/write speeds reach 25,000/85,000 IOPS. For energy saving and environmental protection, the low power consumption of the mSATA SSD greatly reduces electricity costs. When the SX300 and hard drive are used together in a hybrid configuration (SSD Caching), costs can be greatly reduced, with still reaching nearly the speed performance of an SSD as primary drive. Compared to a sole mechanical drive, performance is improved by up to 64%.

Hardware Compatibility
The SX300 is small and light, measuring only 50.95 x 30 x 4mm. It is applicable to many motherboards on the market that have an mSATA slot, including Acer TM8481G and MSI GT70. For more detailed information on compatible hardware, refer to the website of the relevant notebook manufacturer.

Specifications
CAPACITY 128GB
INTERFACE TYPE mSATA
FORM FACTOR 50mm
DEVICE TYPE SSD Solid State Disk
DATA TRANSFER RATES Sequential read: Up to 550MB/s
Sequential write: Up to 505MB/s
IOPS: Read 25,000/Write 85,000 (Maximum 4K Random Write)
FLASH STORAGE DETAILS MLC NAND Flash
OPERATING TEMPERATURE 0°C to 70°C
MTBF 1,200,000 hours
SHOCK RESISTANCE 1500G/0.5ms
SYSTEM REQUIREMENTS Fully compatible with devices and OS that support the SATA III 6Gb/s standard
and spare mSATA slot
DIMENSIONS 50.95 x 30 x 46mm
WEIGHT 7g
PACKAGING Retail packaging
WARRANTY 3 years manufacturers warranty
User Reviews
No reviews yet
Add your review