C2G 9.8ft USB 2.0-A to USB-B Angled Cable
| IN STOCK |
C2G 10FT USB Type-A Male to Micro USB Type-B Male Charging Cable - Black
| IN STOCK |
NEON USB2.0 Cable A Male to A Male Black - 300cm
| IN STOCK |
Tripp Lite 6FT USB2.0 Hi-Speed Micro USB-B Male to USB-C Male Cable
| IN STOCK |
C2G USB to DB9 RS232 Adapter Cable - Blue - 1.5ft
| IN STOCK |
StarTech 10ft (3m) USB2.0 Extension Cable Type-A Male to Type-A Female Black
| IN STOCK |
StarTech USB-C to USB-C Charging Cable
| IN STOCK |
C2G 3ft USB-C to DisplayPort Adapter Cable - White
| IN STOCK |
3FT USB A To USB C Right Angle Charging Cable - Black
| IN STOCK |
StarTech 6in Micro USB2.0 Type-A to Micro Type-B Cable Black
| IN STOCK |
Startech 3ft Male to Male USB-C to DisplayPort Cable
| IN STOCK |
Tripp Lite 6FT USB2.0 Hi-Speed USB-A Male to USB-B Male Cable
| IN STOCK |
Belkin Pro Series Hi-Speed USB2.0 Extension Cable 3.0m Black
| IN STOCK |
Startech 6ft DisplayPort to USB-C Cable - Black
| IN STOCK |
C2G 16.4FT USB Type-A Male to USB Type-A Male Active Extension Cable - Black
| IN STOCK |
Tripp Lite's 5 m USB 3.0 active extension cable is a bus powered extension cable that can be used to increase the length of a device cable without the worry of signal loss and potential performance problems. Increase the extension distance to 10 m by connecting two U330-05M together.
USB limits a cable's length to 4.88 m Any length above 4.88 m requires the use of an active cable such as this one. This cable has a signal booster built in. The cable must be plugged directly into a USB port (either on the PC or a hub). Use a standard 1.83 m, 3.05 m, 4.57 m USB 3.0 A-B cable to reach the desired distance. The U330-05M provides up to 770mA of power to the connected device. If your device requires more than 770mA of power, an external power supply will be required for the connected USB device.
● Extend a USB 3.0 signal 5 m
● Increase the extension distance to 10 m by connecting two U330-05M together
● Works together with standard USB 3.0 cables
● Provides up to 770mA of power to the connected device. If your device requires more than 770mA of power, an external power supply will be required for the connected USB device.
● Backward compatible to previous USB generations
| LENGTH | 4.88 m |
| USB VERSION | USB3.2 Gen 1 (3.1 Gen 1) |
| GENDER | Male to Female |
| LEFT CONNECTOR | USB A |
| RIGHT CONNECTOR | USB A |
| DATA TRANSFER RATE | 5000 Mbit/s |
| COLOR | Black |
| LEFT CONNECTOR FORM FACTOR | Straight |
| RIGHT CONNECTOR FORM FACTOR | Straight |