Lindy 10m RJ45 S/FTP LSZH Network Cable, Grey by Lindy
- Be the first to review
- Item Number: FD3457476
- Part Number: 47268
|
Ships in 8 days Free shipping to Phoenix, AZ! Free returns for any reason |
.png){kind=logo}
Key Features
- Twisted Pair Patch Cable with RJ45 connectors
- Connector: Cat.6A / Cable: Cat.7 S/FTP (600Mhz)andnbsp; andnbsp;
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
See product description
Similar Products
-
10FT C2G RJ-45 Male To RJ-45 Male Cat6 Molded Snagless Unshielded Ethernet Network Patch Cable - Yellow
IN STOCK
$ 16.13 -
6FT C2G RJ-45 Male To RJ-45 Male Cat6 Slim Snagless Unshielded Ethernet Patch Cable- Blue
IN STOCK
$ 19.90 -
C2G Cat6 550MHz Snagless 6ft Patch Cable - Grey
IN STOCK
$ 12.50 -
Tripp Lite 5FT RJ45 Male Cat5e 350MHz Snagless Molded UTP Patch Cable - Blue
IN STOCK
$ 10.04 -
Tripp Lite 75FT RJ45 Male to RJ45 Male Cat5e 350MHz Snagless Molded UTP Patch Cable - Blue
IN STOCK
$ 27.15 -
C2G Unshielded Snagless Cat6 Ethernet Network Cable - Green - 5ft
IN STOCK
$ 11.80 -
82FT Tripp Lite LC To LC Multimode Duplex Fiber Optics Patch Cable - Lime Green
IN STOCK
$ 149.53 -
Tripp Lite 3FT RJ45 Male to RJ45 Male Industrial Cat6 UTP Ethernet Cable 100W PoE CMR-LP IP68 - Blue
IN STOCK
$ 22.40 -
Tripp Lite 7FT RJ45 Male Cat5e 350MHz Snagless Molded Patch Cable - Yellow
IN STOCK
$ 10.83 -
Tripp Lite 3FT SC to ST Duplex Multimode 62.5/125 Fiber Patch Cable - Orange
IN STOCK
$ 19.47 -
StarTech Cat6 1ft Snagless UTP Patch Cable Blue
IN STOCK
$ 10.65 -
Tripp Lite 7FT RJ45 Male Cat5e 350MHz Snagless Molded Patch Cable - White
IN STOCK
$ 10.84 -
20FT Tripp Lite Duplex LC Multimode To LC Multimode 50/125 OM3 LSZH Fiber Patch Cable - Aqua
IN STOCK
$ 33.71 -
C2G Cat6 Snagless Shielded 25ft Network Cable - Orange
IN STOCK
$ 33.73 -
15FT C2G RJ45 TO RJ45 Cat6 Snagless Unshielded Network Patch Cable - Green
IN STOCK
$ 21.42
Details
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: 'Cat.6A S/FTP patch cords with 600MHz raw cable'.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: 'Cat.6A S/FTP patch cords with 600MHz raw cable'.
Specifications
| TYPE | Cat7 |
| LENGTH | 10 m |
| LEFT CONNECTOR | RJ-45 |
| RIGHT CONNECTOR | RJ-45 |
| CABLE SHIELDING | SF/UTP (S-FTP) |