- Twisted Pair Patch Cable with RJ45 connectors
- Cat.6A S/FTP PIMF, TPE
- Fully GRS Certified, Made from 50% Recycled Materials
Expected to ship within 13 days of order
- 1x LC SM male connector
- 1x SC SM male connector
- OS1 (9/125)
Expected to ship within 12 days of order
- Supports 10 Gb Ethernet for fast data transfer
- Multi-mode OM3 fiber with a 50-micron core providing high bandwidth over medium distances
- Optimized for LED and VCSEL laser transmission at 850 nm and 1300 nm wavelengths
Expected to ship within 12 days of order
- OS2 FIBER CABLE: Single Mode OS2 Fiber Cable is immune to EMI and optimized for 100Gbps networks; Coarse Wavelength Division Multiplexing (CWDM) enables extended 1260-1625nm wavelength support for greater channel isolation over long distances
- QUALITY CONSTRUCTION: LC/SC-UPC ends for improved return loss over PC polish; Numbered connectors to indicate polarity; Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 10mm
- SAFETY AND RELIABILITY: Individually tested for guaranteed performance; Test report included; LSZH jacket emits low toxic fumes if combusted; Safe for enclosed/poorly ventilated spaces; Attenuation value under 0.35dB/km outperforms industry standards
Expected to ship within 12 days of order
- OM5 FIBER CABLE: OM5 LOMMF Cable is optimized for advanced 40/100Gbps fiber networks; Extended 850-953nm wavelength support enables SWDM (short wavelength division multiplexing) for greater channel isolation, enhancing performance capacity beyond OM4 cables
- QUALITY CONSTRUCTION: LC/LC-UPC ends for improved return loss over PC polish; Zipcord design, color-coded connectors for polarity; Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 6cm and 3cm when unloaded
- SAFETY AND RELIABILITY: Individually tested for guaranteed performance; Test report included; LSZH jacket emits low toxic fumes if combusted; Safe for enclosed/poorly ventilated spaces; Attenuation value under 2.4dB/km meets or exceeds industry standards
Expected to ship within 5 days of order
- Twisted Pair Patch Cable with RJ45 connectors
- Cat.6A S/FTP PIMF
- Integrated snagless connector for latch protection
Expected to ship within 13 days of order
- Twisted Pair Patch Cable with RJ45 connectors and Test Report (100% Test)
- Cat.6 S/FTP PIMF, LSZH
- Integrated snagless connector for latch protection
Expected to ship within 13 days of order
- Twisted Pair Patch Cable with RJ45 connectors and Test Report (100% Test)
- Cat.6 S/FTP PIMF, LSZH
- Integrated snagless connector for latch protection
Expected to ship within 13 days of order
- TAA-compliant
- Constructed with high quality, made in the USA raw cable for consistent, reliable performance
- Snagless RJ45 connector design protects clips from being easily snapped off – great for applications with high insertion cycles
Expected to ship within 12 days of order
- CAT8 ETHERNET CABLE: Snagless S/FTP Cat8 cable is optimized for enterprise 25/40Gbps networks; 2000MHz frequency range enhances throughput capacity; Up to 4 times faster than Cat6a; Supports Power over Ethernet (PoE++) devices up to 100W
- QUALITY CONSTRUCTION: Shielded 50-micron gold-plated connectors enable a precise fit to minimize wear and signal loss; Rated beyond 750 insertions; 26AWG pure bare copper wire with braided shield enhance EMI protection for consistent throughput and power
- SAFETY AND RELIABILITY: Fluke channel tested for guaranteed Cat8 performance; PoE++ specifications complies with IEEE 802.3bt Type 4; Low Smoke Zero Halogen (LSZH) jacket is safe for enclosed/poorly ventilated spaces and emits low toxic fumes if combusted
Expected to ship within 5 days of order
- Fiber Optic Duplex Patch Cable incl. Measurement protocol
- Multimode
- 50/125 microns
Expected to ship within 13 days of order
- 1 m
- RJ-45 Straight Male
- RJ-45 Straight Male
Expected to ship within 13 days of order
- 2 x LC Male to 2 x LC Maleandnbsp;
- Twin Zip, Multimode 50/125µm fibre
- Total immunity to electrical and electromagnetic interference (EMI)
Expected to ship within 13 days of order
- CAT6A ETHERNET CABLE: High-performance Ethernet Cable for error-free 1/2.5/5/10Gbps multi-gigabit/multi-speed connections; Low Near-End Crosstalk (NEXT) and Return Loss (RL); Tested to meet ANSI/TIA-568.2-D standards; Fluke Tested and ETL Verified
- 100W POWER OVER ETHERNET (PoE): Supports PoE devices up to 100W PoE++ - Complies with IEEE 802.3bt for Type 4 PoE Devices
- PURE COPPER WIRING: 27 AWG 100% stranded copper wire delivers error-free data and stable PoE power, unlike the lower quality copper-clad aluminium versions of other brands, Gold-plated connector pins improve signal integrity
Expected to ship within 5 days of order
- Twisted Pair Patch Cable with RJ45 connectors
- Connector: Cat.6A / Cable: Cat.7 S/FTP (600Mhz)
- Integrated snagless connector for latch protection
Expected to ship within 13 days of order
Network cables are an essential part of any office setup, regardless of the office size - anything from a home office setup, to large corporate offices will require a range of network cables. We carry network cables in stock for every purpose, be it short patch cables for use in a server cabinet, or much longer cables for running above ceilings or behind walls, or anything in between - we have it all. The main connection type used for network cables is the RJ45 connector type. This is the generic standard for connection to switches, patch panels, network cards etc. When picking the cable that is right for you, you should also look out for which color may work best in your setting, and you might want to consider a snagless cable, especially if you run multiple cables across your network setup.
