Thermal Grizzly Kryonaut Thermal Grease Paste - 1.0 Gram

I put this in two (so far) mid-2012 MacBook Pros and according to Fanny, they're idling at 36-40 degrees Celsius and haven't seen them go above 70 degrees Celsius. Application was easy enough with Thermal Grizzly's applicator tip, and the price was very reasonable. Not only do I highly recommend Kryonaut, but I recommend buying it from memoryC!

Thermal Grizzly Kryonaut is wonderful to work with. The syringe with special applicator tip made the job easy. In the past I've used the usual pea-sized amount in the centre, but some CPU coolers install by putting pressure on one side of the CPU heat spreader. This causes the thermal paste to spread un-evenly. Putting small amounts in the corners or drawing an X does help, but it's not perfect.

The Thermal Grizzly applicator eliminates that problem entirely. I have seen tests done of different application methods, but they didn't test the installation method of the cooler. My own tests with my specific cooler showed huge issues with spreading.

My temps are well in-check, and are seeing improvements over the paste installed at the factory for my AIO cooler.

I highly recommend this product.

Without a doubt the best thermal paste I've used
The results are shocking, even with overclocking and warm environment, the temperatures were below stock temperatures. This stuff works and it is much safer and easier to apply than liquid metal. Go for this if you don't want any stress and headache just for extra few degrees less.

Great results when I used on My game systems. Fans aren’t loud anymore and systems run less hot. I would recommend this over all other thermal pastes out there. I also like the way the tube tip gives u a way to apply it very easily and let’s the paste spread evenly. Excellent Product! Thanks again Grizzly

One of the best or simply the best ! Dropped my cpu temp by 5 degrees alone. No cure time so it will last for very long time.

Successfully used this to revive an old laptop. The thermals were way off on the discrete GPU, and it was hanging a lot. Now, the problem seems to be resolved!

Gave me -2°C compared to Gelid Solutions Extreme Performance GC-3 on both CPU & GPU. Highly recommended! Probably the best paste that you can buy. Also, buy from MemoryC!

I've used a number of different performance thermal pastes, and this one has to be one of my favorites. It's easy to apply, and not too thin or too thick, not overly stringy, and non conductive. With this paste I lost about 8°C on all the chips I needed to cool in the system I tested it in, and this allows the system I tested it to be able to run with the fan off most of the time now. The other thing about this paste is it takes less time compared to some pastes to settle in, especially if you are working with systems that don't use a high mounting pressure on the cooler. If you need thermal paste, this is what I would get.

used it to repaste MSI Ge72 7RE and I get good result. Temperatures befor use this page 95°C after 80-85°C using CPU-Z stress test.
I also satisfy with MemoryC service.

Review of Thermal Grizzly Kryonaut Thermal Grease Paste 1g

Arrived on time without a fuss, and a good product, good shop
Thank you